Related products
With this kit you will be able to have the best drivetrain in the world for combat robots from the Lightweight to Featherweight classes (hence the name of the LiFe Motion Kit). With this set of motor + gearbox + wheel, your robots will be able to suffer any type of impact that will continue to drive normally, as if nothing had happened!
The RC-DWNS gearbox has been specially developed for applications with high mechanical demands, impacts and high loads. It has a bi-rolled output shaft and solid construction, which makes it perfect for combat. The COMBAT 100mm wheel was also specially developed for combat robot competitions and the DeWalt New Style engines need no introduction, they are an integral part of one of the best electric screwdrivers in the world.
Kit Contents:
Attach this assembly to your chassis, plug in your motor controller and never miss a round again!
Specifications:
RC DWNS gearbox Specifications:
Type: | planetary |
Reduction: | 17:1 |
Gear material: | steel |
Weight: | 610g |
COMBAT 100mm Wheel Specifications:
Outside Diameter: | 100 mm |
Width: | 45 mm |
Central Hub Hole: | 15 mm |
Keyway: | 5 mm - DIN6885 |
Cube Material: | Aluminum 6351-T6 |
Tire Material: | Vulcanized Rubber |
Tire Hardness: | 50 Shore-A |
Weight: | 415 g |
DeWalt 18V New Style Motor Specifications:
Nominal voltage | 18V |
Weight: | 450g |
Length (body): | 71.2mm |
Total length: | 89mm |
Diameter : | 47,1mm |
Shaft diameter: | 5mm |
Documentation:
To make comments you must be logged in. Login.
You are not registered yet? Register Now!
henrique.smsilva29
Sent 2020-01-11 11:26:56
Sent 2020-01-11 11:26:56
Vende apenas o motor com a caixa de redução ? Qual seria o peso de cada peça ?
Giovanni5
Sent 2020-01-13 07:55:09
henrique.smsilva29
Sent 2020-01-13 07:55:09
henrique.smsilva29
Sim, vendemos o motor e a caixa de redução separadamente, você pode encontrar este anúncio através do link a seguir, https://www.robocore.net/loja/motores/kit-dwns , e cada conjunto destes (motor + caixa de redução) possui um peso de 610 g. Entretanto, o Kit DWNS e o Kit LiFe Motion foram descontinuados, portanto não teremos mais unidades em estoque.
matheusgalvao
Sent 2017-12-17 02:47:35
Sent 2017-12-17 02:47:35
Qual seira a sugestão de placa para esse pode ser usada nesse kit?
Francois
Sent 2017-12-18 11:42:59
matheusgalvao
Sent 2017-12-18 11:42:59
matheusgalvao
A OSMC (https://www.robocore.net/loja/produtos/kit-open-source-motor-control-osmc-50v.html) é uma opção para o controle desse motor, porém é uma placa grande, só aceita controle por PWM e é um projeto antigo. Outras opções são a Sabertooth 2x60 (https://www.robocore.net/loja/produtos/controlador-motor-sabertooth-2x60.html) e a Syren 50A (https://www.robocore.net/loja/produtos/syren-50a.html), mas elas devem ser cuidadosamente dimensionadas em função da sua aplicação (não são recomendadas para combate) porque o motor DeWalt New Style pode atingir até 200 A de pico. Uma controladora de velocidade que suporta pelo menos 200 A de pico em 18 V é o recomendado para o motor desse kit. É ainda melhor se essa placa tiver proteção térmica e contra sobrecorrente.
Wurs
Sent 2017-12-18 17:59:00
matheusgalvao
Sent 2017-12-18 17:59:00
matheusgalvao
Completando este resposta, recomendaria usar ele em 4 células de lítio, ou seja 4S = 16.8V Desta forma o motor trabalha em uma corrente menor e ainda fica mais confiável. Nesta configuração a Sabertooth 2x60 é uma boa opção.
Ricardo_Ribas
Sent 2016-12-06 10:40:24
Sent 2016-12-06 10:40:24
Sabem de alguma placa que pode ser utilizada para o controle desse motor ? De preferência vendida aqui mesmo, que esteja disponível antes do natal hahah
ViniDj
Sent 2016-12-06 11:41:09
Ricardo_Ribas
Sent 2016-12-06 11:41:09
Ricardo_Ribas
Aqui no Brasil acho que vai ser um pouco difícil encontrar, mas uma placa que controla esse motor é a Sabertooth 2x60.