Related products
Hub Sextavado 12mm - Eixo de 8mm
R$19,908mm Keyed Shaft Coupler
R$21,90COMBAT wheel - 80x30-8mm
R$179,90Orbit500V2 Gearbox 16:1
R$189,00
The Orbit500-V2 planetary gearboxes, was created to provide a lightweight, compact and versatile reduction option. Specially made to adapt to the most diverse projects of automation, robotics, movement systems and academic works.
Due to its small size, this set is perfect for creating compact prototypes.
Output Rotation: | 400 RPM |
Voltage: | 12 VDC |
Current (no load): | 0,36 A |
Current (maximum efficiency): | 1,76 A |
Current (stall): | 14 A |
Torque (maximum efficiency): | 4,9 Kgf.cm |
Torque (stall): | 27,2 Kgf.cm |
Power (maximum efficiency): | 16,5 W |
Reduction Type: | Planetary |
Ratio: | 16:1 (2 Stages) |
Output Shaft Diameter: | 8mm |
Shaft Fitting Type: | 3mm keyway with M3 thread on the tip |
Width / Height (Square): | 38mm (1.5") |
Gearbox Length: | 47,5mm |
Shaft Length: | 26mm |
Total Length with Motor: | 134,5mm |
Assembly Points: | 8 holes with M4 thread |
Gear Module: | 0,6 |
Gear Material: | SMF5040 Steel (30-40 HRC hardness) |
Block Material: | Zamak-5, Zinc plated |
Set Weight: | 484g |
DOCUMENTATION
To make comments you must be logged in. Login.
You are not registered yet? Register Now!
gustavo.eichstadt22
Sent 2023-10-24 17:00:23
Sent 2023-10-24 17:00:23
Qual a melhor placa para botar esse cara para rodar ??
luan.ferreira
Sent 2023-10-25 09:01:45
gustavo.eichstadt22
Sent 2023-10-25 09:01:45
gustavo.eichstadt22
Olá! Neste caso, isso irá depender muito dos demais itens do seu projeto. Em linhas gerais, para o controle deste motor, pode ser usado uma controladora como o “Controlador de Motor 2x20A” ( https://www.robocore.net/driver-motor/controlador-de-motor-2x20a ), por exemplo.